- Products
- 3D Printing
- Bambu Lab
- Filament
- Bambu Lab Support Filament
Bambu Lab Support Filament
Official Bambu Lab dealer
Bambu Lab support filament
Support material that is easy to remove and gives overhangs a smooth underside. You use it as an interface layer between your model and the support, with the AMS or a dual-nozzle printer. Choose the support that matches your main material.
Which support are you looking for?
Compare
Which support suits your filament?
All Bambu Lab support filaments side by side, in the same order as above.
| Filament | Why choose it | Works with | Good to know |
|---|---|---|---|
| 1. For PLA and PETG | |||
| Support for PLA/PETG | Comes away without tools, one support for two materials | PLA and PETG | Natural or black, 0.5 kg; all nozzles |
| Support for PLA | A smooth support interface for PLA | PLA | White; all nozzles |
| 2. For ABS | |||
| Support for ABS | Easy to remove, dissolves in limonene | ABS | White, 0.5 kg; nozzle of 0.4 mm or larger |
| 3. For PA and PET | |||
| Support for PA/PET | A smooth support interface for engineering filaments | PAHT-CF, PA6-CF, PA6-GF and PET-CF | Green, 0.5 kg; hardened steel 0.4 mm or larger, drying required |
How it works
Support as an interface layer
Only the contact layer
You print only the layer that touches your model in support material. The rest of the support is printed in your main material. That way you use very little support filament.
Zero gap
Because support material barely bonds to your model, you can set the gap between support and model to zero. That gives a crisp, smooth underside.
Good to know
How to get the most out of your support
AMS or two nozzles
To combine support and model in one print, you need an AMS or a printer with two nozzles.
Settings in Bambu Studio
Select the support filament for the support interface and set the top Z distance and interface spacing to 0.
Drying
Support for PA/PET must be dried before use and kept dry while printing. For the other supports, drying is optional.
Soluble?
These supports don’t dissolve in water: you remove them by hand. Support for ABS can also be dissolved in limonene.
FAQ
Frequently asked questions
Which support should I choose?
Choose the support that matches your main material. If you print PLA or PETG, Support for PLA/PETG is the most convenient choice. For ABS, use Support for ABS, and for fibre-reinforced PA and PET filament, Support for PA/PET.
Can I print a whole model in support filament?
No. Support filament is only meant for the contact layer between support and model, not for whole models.
Does support filament work in the AMS?
Yes. Support for PLA/PETG and Support for PLA work in the AMS and the AMS lite. Support for ABS and Support for PA/PET work in the AMS.
Can I order a colour that is out of stock?
No, you can only order what is actually in stock. Each product page shows how many units of each colour are available. If a colour is temporarily unavailable, ask to be notified on the product page or get in touch with us.
How fast is delivery?
In-stock items are usually delivered within 1 to 3 working days in Belgium. Collection in Aalst is also possible.
Questions about filament?
We’re happy to help you pick the right colour or material, by phone or by email.