- Products
- 3D Printing
- Bambu Lab
- Filament
- Bambu Lab PA
Bambu Lab PA
Official Bambu Lab dealer
Bambu Lab PA filament (nylon)
Strong, stiff and heat-resistant nylon, reinforced with carbon or glass fibre. For jigs, moulds, car parts and industrial applications. You need an enclosed printer and a hardened steel nozzle, and dry filament is a must.
Which nylon are you looking for?
Compare
Which nylon suits your project?
All Bambu Lab PA filaments side by side, in the same order as above.
| Filament | Why choose it | Ideal for | Good to know |
|---|---|---|---|
| 1. All-round technical | |||
| PAHT-CF | Strong and tough, absorbs little moisture | Jigs, moulds and functional prototypes | Works in the AMS, not the AMS lite; 0.5 or 1 kg |
| PA6-CF | Very stiff and strong | Clamps, fixtures and car parts | Not for the AMS; 0.5 or 1 kg |
| 2. With glass fibre, in colour | |||
| PA6-GF | Dimensionally stable, with a smooth surface, in several colours | Industrial parts and precise shapes | Works in the AMS and AMS lite |
| 3. Top performance | |||
| PPA-CF | Exceptionally strong, heat-resistant up to 227 °C, stable in humid conditions | Automotive and industrial parts, propellers | Not for the AMS, 750 g on a cardboard spool |
| Accessories | |||
| Support for PA/PET | A smooth support interface for PA and PET | PAHT-CF, PA6-CF, PA6-GF and PET-CF | Hardened steel nozzle, drying required |
Before you start
What you need to print nylon
Enclosed printer and hardened steel
Carbon and glass fibre are abrasive: use a hardened steel nozzle of 0.4 mm or larger, 0.6 mm is recommended. An enclosed printer prevents warping.
Dry filament
Nylon absorbs moisture quickly and then prints poorly. Always dry it before use and store it airtight with desiccant, below 20% humidity.
Good to know
How to get the most out of your nylon
Hardened steel nozzle
Use a hardened steel nozzle for all fibre-reinforced nylon. A 0.2 mm nozzle won’t work and stainless steel is not recommended; 0.6 mm gives the best results.
Drying is a must
Dry PAHT-CF, PA6-CF and PA6-GF for 8 to 12 hours at 80 °C. Dry PPA-CF at 100 to 140 °C. Store everything airtight with desiccant.
Build plate and glue
Use the Engineering, Smooth PEI or Textured PEI Plate with a glue stick. Liquid glue is not recommended.
Enclosed printer
Nylon shrinks as it cools. Print it in an enclosed printer to avoid warping and cracking.
FAQ
Frequently asked questions
Which nylon should I choose?
PAHT-CF is a strong all-rounder that absorbs little moisture. PA6-CF is very stiff. Choose PA6-GF if you want colour or want to print from the AMS lite. PPA-CF is for the most demanding high-temperature applications.
Can I print nylon on an A1?
Bambu Lab advises against it. You need an enclosed printer, such as a P1S, P2S, X1 or H2D, with a hardened steel nozzle.
Does nylon work in the AMS?
PAHT-CF works in the AMS, AMS 2 Pro and AMS HT, but not in the AMS lite. PA6-GF works in the AMS and the AMS lite. Print PA6-CF and PPA-CF from the external spool holder.
Why is drying so important?
Nylon absorbs moisture from the air. Damp filament causes bubbles, stringing and weaker prints. So always dry it before use and store it airtight.
Can I order a colour that is out of stock?
No, you can only order what is actually in stock. Each product page shows how many units of each colour are available. If a colour is temporarily unavailable, ask to be notified on the product page or get in touch with us.
How fast is delivery?
In-stock items are usually delivered within 1 to 3 working days in Belgium. Collection in Aalst is also possible.
Questions about filament?
We’re happy to help you pick the right colour or material, by phone or by email.