01
Laser welding
Seam, tack and pulse welding from 0.2 to 5 mm, with minimal distortion thanks to a very small heat-affected zone.
Incl. free MaxClean™
Official xTool dealer
All-in-One bundle
xTool MetalFab 1200W All-in-One Bundle
Weld, cut, clean and engrave with a single fibre laser. Laser welder, CNC cutting table and industrial air purification in one package: your complete metal workshop.
1200 W fibre laserCoherent laser chip
610 × 610 mmCNC work area, pass-through
Welding up to 5 mmin a single pass
Cutting up to 10 mmcarbon steel, burr-free
- In stock = delivery in 1–3 working days
- Includes SafetyPro™ AP2 Max air purifier
- Free gift: xTool MaxClean™ 45 mm laser cleaning accessory
1200Wfibre laser for welding, cutting and cleaning
5mmwelding in a single pass (stainless steel, steel, titanium)
10mmburr-free cutting in carbon steel
±0.1mmCNC motion accuracy
98.7%material utilisation with AI nesting
108+preset material settings
One laser source, four techniques
Your complete metal workshop in one set
The 1200W laser source powers both the handheld welding torch and the CNC cutting table. Switch from welding to cutting, cleaning or engraving in just a few steps.
02
CNC cutting
Up to 10 mm carbon steel burr-free in a single pass, with a narrow kerf and ±0.1 mm accuracy.
03
Laser cleaning
Remove rust, paint and weld discolouration: up to 10 mm wide after welding, up to 45 mm with the included MaxClean™.
04
CNC engraving
Serial numbers, logos and labels on stainless steel, steel, galvanised sheet and anodised aluminium.
What's in the bundle
Everything to get started right away, 13 items
Three machines, a free cleaning accessory and all the nozzles, tips and protective gear you need for your first projects.
1×
MetalFab 1200W laser welder
The heart of the set: an air-cooled fibre laser with an 8" touchscreen and a welding torch on a 5 m cable. Welds, cuts by hand and cleans.
1×
MetalFab CNC cutter
Enclosed 610 × 610 mm CNC table with pass-through, dual camera and AI nesting. Uses the welder's laser source.
1×
SafetyPro™ AP2 Max
Industrial air purifier with 700 m³/h, up to 7 filter layers and cyclone separation. Starts and stops automatically with your xTool machine.
Free gift
xTool MaxClean™ 45 mm laser cleaning accessory
Remove rust and paint across a 45 mm width in one sweep, three times wider than a standard 15 mm cleaning head. The laser only activates on contact with the workpiece, which makes it safer to use.
Accessories and consumables
- 1×Wire feeder unit
- 1×Stainless steel welding wire 1 mm
- 1×Welding nozzle for autogenous welding
- 1×Cleaning nozzle
- 1×Cutting tip (handheld cutting)
- 1×Telescopic cutting nozzle
- 1×CNC cutting tip
- 1×CNC cleaning nozzle
- 1×Safety goggles and gloves
Laser welding
Clean welds without years of practice
Fibre laser technology melts metal extremely fast and keeps the heat-affected zone below 0.05 mm. Weld thin sheet without distortion and up to 5 mm in a single pass, with deep, narrow and even seams.
- 8" touchscreen with 108+ presets: choose your material and thickness and start, without endless testing.
- Three welding modes: seam welding, tack welding and pulse welding.
- Wire feeder included, with 1 mm stainless steel welding wire for wider seams and filling.
- Fast results: professional welds after a few hours instead of months of practice.
≤0.05 mmheat-affected zone
0.2–5 mmwelding range
5 mtorch cable
CNC cutting
Precision you can see, down to the smallest detail
The 1200W fibre laser cuts carbon steel up to 10 mm burr-free in a single pass. Thanks to the narrow kerf and ±0.1 mm accuracy, even fine details come out crisp, with far less post-processing.
- VibeFreeCut™: motion algorithms suppress vibrations in real time for stable, clean cuts.
- Pass-through 610 × ∞ mm: simply slide longer sheets through the machine.
- One-click software: material settings, smart cut-path planning and AI-generated designs.
400 mm/smax. speed
±0.1 mmaccuracy
90 mmZ axis
98.7%
AI nesting
The 16 MP panoramic camera analyses your sheet and places parts optimally with one click, even on offcuts.
<0.2 mm
Close-range camera
Positions with less than 0.2 mm deviation from the centre. Ideal for small parts and name tags.
−50%
SaveGas™ nozzle
Cut 4 mm stainless steel burr-free with compressed air at 0.6 MPa instead of 1.2 MPa nitrogen. Compressor and dryer sold separately.
24/7
Continuous output
Industrial laser source that can run non-stop, for small batches and production work alike.
Materials and thicknesses
From 0.2 mm sheet to 10 mm steel
Supports stainless steel (304/316/410/430), aluminium (1060/5083/6061/6063/7075), carbon steel, titanium, brass, galvanised sheet as well as magnesium, nickel and zinc alloys.
| Material | Welding (max.) | Cutting burr-free | Cutting max. (with burrs) |
|---|---|---|---|
| Carbon steel | 5 mm | 10 mm | 12 mm |
| Galvanised steel | 5 mm | 10 mm | 12 mm |
| Stainless steel | 5 mm | 5 mm | 9 mm |
| Titanium | 5 mm | 5 mm | 6 mm |
| Aluminium | 4 mm | 4 mm | 6 mm |
| Brass | 4 mm | 3 mm | 4 mm |
Minimum thickness for welding and cutting: 0.2 mm. Welding = single-sided penetration. Maximum values based on xTool laboratory tests; results depend on material, gas and settings.
Applications
From hobby project to production
Makers, workshops, car body repairers and schools use the MetalFab to make everything from art pieces to functional parts.
Metal art and sculpturesSigns and signagePrototyping and small batchesCar body repairEducation and makerspaces
Included in this bundle
Clean air and fast cleaning
What sets this All-in-One bundle apart from a separate welder with cutting table.
SafetyPro™ AP2 Max
Industrial air purifier for large laser machines. Captures fumes and fine dust before they enter your workshop.
- 700 m³/h airflow
- Up to 7 filter layers, removes 99.97% of particles, with formaldehyde filter
- Cyclone separation captures coarse particles: the pre-filter lasts 10× longer
- 4× filter capacity and automatic on/off with your xTool machine
MaxClean™ 45 mm · free
Attachment for the welding torch that makes old, rusty or painted parts usable again.
- 45 mm cleaning width in a single pass
- 3× wider than a standard 15 mm cleaning head
- Contact activation: the laser only fires when the head touches the workpiece
- Reuse material and reduce waste
Quality and safety
Built to last
Industrial laser source
A Coherent laser chip, smart thermal management and high-performance cooling materials ensure stable power, even at -10 °C or 40 °C. According to xTool, the source lasts 30% longer than comparable machines.
≥ 10,000 hours lifespan24/7 operation-10 to 40 °CAir-cooled
10 safety features
The MetalFab is CE, FCC and FDA certified and has ten built-in safety features. Safety goggles and gloves are in the box, and the AP2 Max extracts the fumes.
CEFCCFDALaser class 4Goggles + gloves incl.
Technical specifications
All the details at a glance
Processing
- Laser power
- 1200 W
- Laser type
- Fibre laser, 1080 ± 10 nm
- Functions
- Welding, cutting, rust and paint removal
- Welding modes
- Seam welding, tack welding, pulse welding
- Welding thickness
- 0.2 – 5 mmMax. 5 mm stainless steel, carbon steel, galvanised, titanium. Max. 4 mm aluminium and brass.
- Cleaning width
- Up to 45 mm rust/paint (MaxClean)Up to 10 mm post-weld cleaning
- Recommended gases
- Nitrogen or argon
General
- Efficiency
- 36% photoelectric
- Cooling
- Air cooling
- Safety
- Laser class 4
- Rated power
- 4200 W
- Power supply
- 200–240 V AC, 50/60 Hz, max. 21 A
- Operating temperature
- -10 °C to 40 °C
- Dimensions
- 728 × 327 × 512 mm
- Weight
- 38.2 kg
- Wire feeder
- External wire feeder unit included
- Cable length
- 5 m
Processing
- Functions
- CNC cutting, CNC cleaning, CNC engravingEngraving only on non-highly-reflective metals (stainless steel, steel, galvanised, anodised aluminium). Not on brass, copper or silver.
- Burr-free cutting
- Max. 10 mm carbon steel/galvanised5 mm stainless steel/titanium · 4 mm aluminium · 3 mm brass · min. 0.2 mm
- Max. cutting (with burrs)
- 12 mm carbon steel/galvanised9 mm stainless steel · 6 mm aluminium/titanium · 4 mm brass
- Work area
- 610 × 610 mm
- Pass-through
- 610 × ∞ mm
- Max. speed
- 400 mm/s
- Motion accuracy
- ± 0.1 mm
- Max. acceleration X/Y
- 0.1 G
- Travel X / Y / Z
- 610 / 610 / 90 mm
General
- Laser source
- Via the MetalFab laser welder
- Cameras
- 16 MP panoramic camera + close-range camera
- Safety
- Laser class 4
- Rated power
- 250 W
- Power supply
- 100–240 V AC, 50/60 Hz, max. 2.5 A
- Operating temperature
- 0 °C to 40 °C
- Dimensions
- 1175 × 1157 × 1230 mm
- Weight
- 158 kg
Frequently asked questions
Good to know
What else do I need to get started?
The bundle includes the machines, nozzles, tips and protective gear. You provide:
- Gas for welding: nitrogen or argon.
- Gas or air for cutting: compressed air via a compressor with air dryer (up to 4 mm stainless steel), or nitrogen. For burr-free carbon steel from 2 mm, use oxygen with the double-layer cutting nozzle.
- Power: 200–240 V for the welder (max. 21 A) and 100–240 V for the CNC cutter (max. 2.5 A).
Compressor, air dryer and double-layer nozzles are sold separately. Feel free to ask us what suits your work best.
Can I laser weld without welding experience?
Yes. Laser welding is much easier to learn than TIG or MIG welding. The touchscreen has more than 108 preset material settings: choose material and thickness and you're ready to go. According to xTool, you'll achieve professional results within a few hours.
Do I need a separate laser for the CNC cutter?
No. The CNC cutter uses the 1200W laser source of the welder. This bundle includes both, so you have one laser for two machines.
How large can my sheets be?
The work area is 610 × 610 mm. Thanks to the pass-through, you can slide sheets up to 610 mm wide and of unlimited length through the machine and process them in sections.
Which metals can I engrave?
CNC engraving works on non-highly-reflective metals such as stainless steel, carbon steel, galvanised sheet and anodised aluminium. Brass, copper and silver are not suitable for engraving, but you can weld and cut brass.
Is working with the MetalFab safe?
The MetalFab is CE, FCC and FDA certified and has ten safety features. It remains a class 4 laser: always wear the included safety goggles and gloves and work in a well-ventilated room. The SafetyPro AP2 Max in this bundle extracts fumes and fine dust.
When will my order be delivered?
If the bundle is in stock, we deliver within 1 to 3 working days. Unsure about the delivery time or want a quote in your company's name? Get in touch with us.
xTool MetalFab 1200W All-in-One Bundle
Weld, cut and clean with one machine
Laser welder, CNC cutter, SafetyPro™ AP2 Max and a free MaxClean™ accessory, ready for your workshop.
Specifications and performance according to xTool. Maximum thicknesses are based on laboratory tests and depend on material, gas and settings. Product images: xTool. The price is retrieved live from our webshop.
Incl. free MaxClean™
Official xTool dealer
All-in-One bundle
xTool MetalFab 1200W All-in-One Bundle
Weld, cut, clean and engrave with a single fibre laser. Laser welder, CNC cutting table and industrial air purification in one package: your complete metal workshop.
1200 W fibre laserCoherent laser chip
610 × 610 mmCNC work area, pass-through
Welding up to 5 mmin a single pass
Cutting up to 10 mmcarbon steel, burr-free
- In stock = delivery in 1–3 working days
- Includes SafetyPro™ AP2 Max air purifier
- Free gift: xTool MaxClean™ 45 mm laser cleaning accessory
1200Wfibre laser for welding, cutting and cleaning
5mmwelding in a single pass (stainless steel, steel, titanium)
10mmburr-free cutting in carbon steel
±0.1mmCNC motion accuracy
98.7%material utilisation with AI nesting
108+preset material settings
One laser source, four techniques
Your complete metal workshop in one set
The 1200W laser source powers both the handheld welding torch and the CNC cutting table. Switch from welding to cutting, cleaning or engraving in just a few steps.
01
Laser welding
Seam, tack and pulse welding from 0.2 to 5 mm, with minimal distortion thanks to a very small heat-affected zone.
02
CNC cutting
Up to 10 mm carbon steel burr-free in a single pass, with a narrow kerf and ±0.1 mm accuracy.
03
Laser cleaning
Remove rust, paint and weld discolouration: up to 10 mm wide after welding, up to 45 mm with the included MaxClean™.
04
CNC engraving
Serial numbers, logos and labels on stainless steel, steel, galvanised sheet and anodised aluminium.
What's in the bundle
Everything to get started right away, 13 items
Three machines, a free cleaning accessory and all the nozzles, tips and protective gear you need for your first projects.
1×
MetalFab 1200W laser welder
The heart of the set: an air-cooled fibre laser with an 8" touchscreen and a welding torch on a 5 m cable. Welds, cuts by hand and cleans.
1×
MetalFab CNC cutter
Enclosed 610 × 610 mm CNC table with pass-through, dual camera and AI nesting. Uses the welder's laser source.
1×
SafetyPro™ AP2 Max
Industrial air purifier with 700 m³/h, up to 7 filter layers and cyclone separation. Starts and stops automatically with your xTool machine.
Free gift
xTool MaxClean™ 45 mm laser cleaning accessory
Remove rust and paint across a 45 mm width in one sweep, three times wider than a standard 15 mm cleaning head. The laser only activates on contact with the workpiece, which makes it safer to use.
Accessories and consumables
- 1×Wire feeder unit
- 1×Stainless steel welding wire 1 mm
- 1×Welding nozzle for autogenous welding
- 1×Cleaning nozzle
- 1×Cutting tip (handheld cutting)
- 1×Telescopic cutting nozzle
- 1×CNC cutting tip
- 1×CNC cleaning nozzle
- 1×Safety goggles and gloves
Laser welding
Clean welds without years of practice
Fibre laser technology melts metal extremely fast and keeps the heat-affected zone below 0.05 mm. Weld thin sheet without distortion and up to 5 mm in a single pass, with deep, narrow and even seams.
- 8" touchscreen with 108+ presets: choose your material and thickness and start, without endless testing.
- Three welding modes: seam welding, tack welding and pulse welding.
- Wire feeder included, with 1 mm stainless steel welding wire for wider seams and filling.
- Fast results: professional welds after a few hours instead of months of practice.
≤0.05 mmheat-affected zone
0.2–5 mmwelding range
5 mtorch cable
CNC cutting
Precision you can see, down to the smallest detail
The 1200W fibre laser cuts carbon steel up to 10 mm burr-free in a single pass. Thanks to the narrow kerf and ±0.1 mm accuracy, even fine details come out crisp, with far less post-processing.
- VibeFreeCut™: motion algorithms suppress vibrations in real time for stable, clean cuts.
- Pass-through 610 × ∞ mm: simply slide longer sheets through the machine.
- One-click software: material settings, smart cut-path planning and AI-generated designs.
400 mm/smax. speed
±0.1 mmaccuracy
90 mmZ axis
98.7%
AI nesting
The 16 MP panoramic camera analyses your sheet and places parts optimally with one click, even on offcuts.
<0.2 mm
Close-range camera
Positions with less than 0.2 mm deviation from the centre. Ideal for small parts and name tags.
−50%
SaveGas™ nozzle
Cut 4 mm stainless steel burr-free with compressed air at 0.6 MPa instead of 1.2 MPa nitrogen. Compressor and dryer sold separately.
24/7
Continuous output
Industrial laser source that can run non-stop, for small batches and production work alike.
Materials and thicknesses
From 0.2 mm sheet to 10 mm steel
Supports stainless steel (304/316/410/430), aluminium (1060/5083/6061/6063/7075), carbon steel, titanium, brass, galvanised sheet as well as magnesium, nickel and zinc alloys.
| Material | Welding (max.) | Cutting burr-free | Cutting max. (with burrs) |
|---|---|---|---|
| Carbon steel | 5 mm | 10 mm | 12 mm |
| Galvanised steel | 5 mm | 10 mm | 12 mm |
| Stainless steel | 5 mm | 5 mm | 9 mm |
| Titanium | 5 mm | 5 mm | 6 mm |
| Aluminium | 4 mm | 4 mm | 6 mm |
| Brass | 4 mm | 3 mm | 4 mm |
Minimum thickness for welding and cutting: 0.2 mm. Welding = single-sided penetration. Maximum values based on xTool laboratory tests; results depend on material, gas and settings.
Applications
From hobby project to production
Makers, workshops, car body repairers and schools use the MetalFab to make everything from art pieces to functional parts.
Metal art and sculpturesSigns and signagePrototyping and small batchesCar body repairEducation and makerspaces
Included in this bundle
Clean air and fast cleaning
What sets this All-in-One bundle apart from a separate welder with cutting table.
SafetyPro™ AP2 Max
Industrial air purifier for large laser machines. Captures fumes and fine dust before they enter your workshop.
- 700 m³/h airflow
- Up to 7 filter layers, removes 99.97% of particles, with formaldehyde filter
- Cyclone separation captures coarse particles: the pre-filter lasts 10× longer
- 4× filter capacity and automatic on/off with your xTool machine
MaxClean™ 45 mm · free
Attachment for the welding torch that makes old, rusty or painted parts usable again.
- 45 mm cleaning width in a single pass
- 3× wider than a standard 15 mm cleaning head
- Contact activation: the laser only fires when the head touches the workpiece
- Reuse material and reduce waste
Quality and safety
Built to last
Industrial laser source
A Coherent laser chip, smart thermal management and high-performance cooling materials ensure stable power, even at -10 °C or 40 °C. According to xTool, the source lasts 30% longer than comparable machines.
≥ 10,000 hours lifespan24/7 operation-10 to 40 °CAir-cooled
10 safety features
The MetalFab is CE, FCC and FDA certified and has ten built-in safety features. Safety goggles and gloves are in the box, and the AP2 Max extracts the fumes.
CEFCCFDALaser class 4Goggles + gloves incl.
Technical specifications
All the details at a glance
Processing
- Laser power
- 1200 W
- Laser type
- Fibre laser, 1080 ± 10 nm
- Functions
- Welding, cutting, rust and paint removal
- Welding modes
- Seam welding, tack welding, pulse welding
- Welding thickness
- 0.2 – 5 mmMax. 5 mm stainless steel, carbon steel, galvanised, titanium. Max. 4 mm aluminium and brass.
- Cleaning width
- Up to 45 mm rust/paint (MaxClean)Up to 10 mm post-weld cleaning
- Recommended gases
- Nitrogen or argon
General
- Efficiency
- 36% photoelectric
- Cooling
- Air cooling
- Safety
- Laser class 4
- Rated power
- 4200 W
- Power supply
- 200–240 V AC, 50/60 Hz, max. 21 A
- Operating temperature
- -10 °C to 40 °C
- Dimensions
- 728 × 327 × 512 mm
- Weight
- 38.2 kg
- Wire feeder
- External wire feeder unit included
- Cable length
- 5 m
Processing
- Functions
- CNC cutting, CNC cleaning, CNC engravingEngraving only on non-highly-reflective metals (stainless steel, steel, galvanised, anodised aluminium). Not on brass, copper or silver.
- Burr-free cutting
- Max. 10 mm carbon steel/galvanised5 mm stainless steel/titanium · 4 mm aluminium · 3 mm brass · min. 0.2 mm
- Max. cutting (with burrs)
- 12 mm carbon steel/galvanised9 mm stainless steel · 6 mm aluminium/titanium · 4 mm brass
- Work area
- 610 × 610 mm
- Pass-through
- 610 × ∞ mm
- Max. speed
- 400 mm/s
- Motion accuracy
- ± 0.1 mm
- Max. acceleration X/Y
- 0.1 G
- Travel X / Y / Z
- 610 / 610 / 90 mm
General
- Laser source
- Via the MetalFab laser welder
- Cameras
- 16 MP panoramic camera + close-range camera
- Safety
- Laser class 4
- Rated power
- 250 W
- Power supply
- 100–240 V AC, 50/60 Hz, max. 2.5 A
- Operating temperature
- 0 °C to 40 °C
- Dimensions
- 1175 × 1157 × 1230 mm
- Weight
- 158 kg
Frequently asked questions
Good to know
What else do I need to get started?
The bundle includes the machines, nozzles, tips and protective gear. You provide:
- Gas for welding: nitrogen or argon.
- Gas or air for cutting: compressed air via a compressor with air dryer (up to 4 mm stainless steel), or nitrogen. For burr-free carbon steel from 2 mm, use oxygen with the double-layer cutting nozzle.
- Power: 200–240 V for the welder (max. 21 A) and 100–240 V for the CNC cutter (max. 2.5 A).
Compressor, air dryer and double-layer nozzles are sold separately. Feel free to ask us what suits your work best.
Can I laser weld without welding experience?
Yes. Laser welding is much easier to learn than TIG or MIG welding. The touchscreen has more than 108 preset material settings: choose material and thickness and you're ready to go. According to xTool, you'll achieve professional results within a few hours.
Do I need a separate laser for the CNC cutter?
No. The CNC cutter uses the 1200W laser source of the welder. This bundle includes both, so you have one laser for two machines.
How large can my sheets be?
The work area is 610 × 610 mm. Thanks to the pass-through, you can slide sheets up to 610 mm wide and of unlimited length through the machine and process them in sections.
Which metals can I engrave?
CNC engraving works on non-highly-reflective metals such as stainless steel, carbon steel, galvanised sheet and anodised aluminium. Brass, copper and silver are not suitable for engraving, but you can weld and cut brass.
Is working with the MetalFab safe?
The MetalFab is CE, FCC and FDA certified and has ten safety features. It remains a class 4 laser: always wear the included safety goggles and gloves and work in a well-ventilated room. The SafetyPro AP2 Max in this bundle extracts fumes and fine dust.
When will my order be delivered?
If the bundle is in stock, we deliver within 1 to 3 working days. Unsure about the delivery time or want a quote in your company's name? Get in touch with us.
xTool MetalFab 1200W All-in-One Bundle
Weld, cut and clean with one machine
Laser welder, CNC cutter, SafetyPro™ AP2 Max and a free MaxClean™ accessory, ready for your workshop.
Specifications and performance according to xTool. Maximum thicknesses are based on laboratory tests and depend on material, gas and settings. Product images: xTool. The price is retrieved live from our webshop.