Colour chart
All colours and their stock
Click a colour to select it straight away.
See all colours and stock
Bambu Lab PLA Sparkle
Sparkling glitter in every print
PLA Sparkle combines strength with sparkle: thanks to the metal particles in the filament, your prints get an eye-catching glittering look. The filament is also relatively impact-resistant.
Print settings
Recommended values from Bambu Lab’s technical data sheet. With the RFID chip, your printer sets them automatically.
Don’t use a 0.2 mm nozzle, as it can clog. Bambu Lab recommends a 0.4 mm hardened steel nozzle.
Properties
More PLA
Need a different finish or more strength?
FAQ
Frequently asked questions
Which nozzle should I use for PLA Sparkle?
A 0.4 mm hardened steel nozzle is the best choice. We advise against a 0.2 mm nozzle, as the particles can clog it.
Does PLA Sparkle work in the AMS?
Yes, in all AMS models. Thanks to the RFID chip, the AMS recognises the filament and print settings automatically.
Can I order a colour that’s out of stock?
No, we only sell filament from stock. Click the colour you want in the colour chart and ask to be notified as soon as it’s back in stock.
How should I store this filament?
Dry and airtight, below 20% humidity, for example with desiccant. If the filament has absorbed moisture, dry it: 8 hours at 55 °C in a drying oven.
How fast is delivery?
In-stock items are usually delivered within 1 to 3 working days in Belgium. Collection in Aalst is also possible.
Questions about filament?
We’re happy to help you pick the right colour or material, by phone or by email.