Bambu Lab H2S Laser Full Combo
3D printing, laser engraving and cutting in one machine
The H2S Laser Full Combo is a complete maker workshop: the H2S with Bambu Lab’s largest build volume, a 10 W laser, a cutting and drawing module and the AMS 2 Pro. The BirdsEye camera shows your design live on the material, so you engrave and cut exactly where you want.
Why the Laser Full Combo
Print, engrave, cut and draw
Laser engraving and cutting
A 10 W, 455 nm laser cuts up to 5 mm plywood and engraves wood, leather, rubber, stone, sheet metal and dark acrylic, at up to 400 mm/s.
Live Spatial Alignment
The BirdsEye camera and toolhead camera show the toolpath live on your material, with 0.3 mm accuracy. What you see is what you get.
Cutting and drawing
The cutting module cuts paper, vinyl, PVC and leather up to 0.5 mm; with the pen holder it draws linework and handwriting.
Safety built in
Laser safety window, five flame sensors, a flame-retardant chamber and an emergency stop. Fully enclosed, the machine operates as a Class 1 laser product.
Air assist and exhaust
A built-in air pump blows away smoke and soot for crisp lines; fumes are vented through the included exhaust pipe.
A full H2S
340 × 320 × 340 mm, hotend up to 350 °C and an actively heated chamber up to 65 °C, with the AMS 2 Pro for multicolour and dry filament.
Applications
Who is the Laser Full Combo for?
Workshops & makers
Personalised products: print a case, engrave a name, cut a sticker. All on one machine.
Education & STEAM
One machine for 3D printing, laser cutting and vinyl cutting, with built-in safety. Laser cutting always under supervision.
Businesses & prototyping
Print parts and housings, engrave front panels and labels, and cut gaskets or films.
Technical specifications
Never leave the machine unattended while laser cutting, keep flammable materials away and vent fumes through the exhaust pipe. The H2S runs on 200–240 V; no USB stick is included.
What’s in the box
- Bambu Lab H2S Laser Edition
- 10 W laser module
- Cutting module with pen holder
- Laser platform and cutting platform
- AMS 2 Pro
- Exhaust pipe and emergency stop button
- Safety key
- Laser and cutting materials to get started
- Textured PEI build plate, spool holder and accessory box
Cutting mats and filament
For the cutting module use a StrongGrip mat (leather, thick card) or LightGrip mat (paper). For printing: filament of your choice.
StrongGrip-matLightGrip-matPLA BasicChoose your version
Starting up, filtering smoke or without laser?
Official Bambu Lab dealer
More than a printer
With FabLab Factory you get a local partner, from setup to repairs.
Starter package
Installation and user guidance on site, so your team can get going safely and smoothly.
View package →Showroom in Aalst
See the laser at work and compare it with the R1 CO₂ laser cutter, by appointment.
Book an appointment →Maintenance & repairs
A maintenance contract for the H2D and H2S Laser Full Combo, and our own repair centre in Aalst.
Maintenance contract →FAQ
Frequently asked questions
Which materials can I laser cut and engrave?
You can cut up to 5 mm plywood and engrave wood, leather, rubber, stone, sheet metal and dark acrylic. Clear or light acrylic does not work with a diode laser; the R1 with its CO₂ laser is suited for that.
Is laser cutting safe?
Fully enclosed, the machine operates as a Class 1 laser product, with a safety window, flame sensors, a flame-retardant chamber and an emergency stop. Never leave it unattended while laser cutting, and keep flammable materials away.
Do I need extraction?
Fumes are vented through the included exhaust pipe (100 mm). If you cannot vent outside, ask us about the Smoke Purifier.
Can I use a 40 W laser?
No, the H2S supports the 10 W laser. If you want a 40 W laser, have a look at the H2D Laser Full Combo or the H2C Laser Full Combo, both available in a 40 W version.
Do I need a USB stick?
Printing works without one, but for timelapse recording, printing over LAN and storing files from Bambu Studio you need a USB stick (USB 2.0 or higher, FAT32 or exFAT). None is included.
How fast is delivery?
In stock means delivery in 1 to 3 working days. Out of stock? Order anyway and we’ll deliver as soon as it arrives.
Still unsure?
We’re happy to help you choose the right printer, by phone, by email or in our showroom in Aalst.
Alternative Products
These other products might interest you