Internal Reference:
PF002-A+SA005-EU2
Bambu Lab A1 Combo
Large-format printing in 4 colours
The A1 Combo pairs the generous build volume of the A1 with the AMS lite. Load four spools and print large, colourful models without intervention: the printer changes colour by itself and calibrates itself fully.
Why the A1 Combo
Large format, full colour
Multicolour with the AMS lite
Load four spools and the printer switches colour or material by itself. Print up to 4 colours in one object, no intervention needed.
Generous build volume
256 × 256 × 256 mm: enough for helmets, enclosures, organisers and larger parts in a single piece.
Fully automatic calibration
Bed levelling, Z-offset, vibration compensation and flow dynamics: the printer handles it all, for every print. No paper tricks, no fiddling with screws.
Active flow rate compensation
A sensor continuously measures the pressure in the nozzle and adjusts extrusion, for accurate layers and clean walls.
Whisper quiet
Active motor noise cancelling and a silent mode below 48 dB. Perfectly at home in a living room, classroom or office.
Smart and connected
Wi-Fi, the Bambu Handy app, a camera for monitoring and timelapses, a filament sensor and power-loss recovery. Also works offline via microSD or LAN mode.
Applications
Who is the A1 Combo for?
Creative makers
Large figures, cosplay parts, signs and decorations, straight in colour and without painting.
Schools & STEAM
Classroom projects in colour, from maps to pupils’ own models. We also offer teacher training.
A1 teacher training →Makerspaces & businesses
Colour-coded prototypes, personalised products and small batches, reliable and low-maintenance.
Technical specifications
Not suitable for ABS, ASA, PC, PA or fibre-reinforced filaments: for those you need an enclosed printer such as the P2S.
What’s in the box
- A1 3D printer
- Spool holder
- Purge wiper
- Build plate
- PTFE tube
- Filament sample (approx. 20 g, random colour)
- Stainless steel nozzle (installed)
- Accessory box
- AMS lite (body and stand)
- 4 rotary spool holders for the AMS lite
Choose your version
Prefer single colour, more compact or enclosed?
Official Bambu Lab dealer
More than a printer
With FabLab Factory you get a local partner, from setup to repairs.
Unpacked & tested
We unpack, assemble and test your printer. Available when collecting in Aalst or Bornem.
View service →Maintenance & repairs
A maintenance contract for the A1 series and our own repair centre in Aalst.
Maintenance contract →FAQ
Frequently asked questions
Which filaments can I use?
PLA, PETG, TPU and PVA. For beginners we recommend PLA Basic: easy to print, strong and available in dozens of colours. ABS, ASA and engineering filaments need an enclosed printer such as the P2S.
Can I use TPU with the AMS lite?
Flexible TPU is best fed directly from the external spool holder. Use PLA or PETG in the AMS lite.
How much waste does a colour change produce?
At every change the printer flushes a little filament. In Bambu Studio you can reduce this by grouping colours smartly and flushing into the infill or into an extra object.
Is it suitable for the classroom?
Definitely: it’s quiet, calibrates itself and is easy to explain. As it’s an open printer with a hot nozzle and moving parts, it’s best used under supervision.
How fast is delivery?
In stock means delivery in 1 to 3 working days. Collection in Aalst is also possible.
Still unsure?
We’re happy to help you choose the right printer, by phone, by email or in our showroom in Aalst.
Alternative Products
These other products might interest you