Internal Reference:
PF002-M+SA005-EU
Bambu Lab A1 mini Combo
Print in 4 colours from day one
The A1 mini Combo pairs the compact, fully automatic A1 mini with the AMS lite. Load four spools and the printer changes colour by itself: ideal for colourful figures, name tags, educational models and gifts.
Why the A1 mini Combo
Colour, without the hassle
Multicolour with the AMS lite
Load four spools and the printer switches colour or material by itself. Print up to 4 colours in one object, no intervention needed.
Fully automatic calibration
Bed levelling, Z-offset, vibration compensation and flow dynamics: the printer handles it all, for every print. No paper tricks, no fiddling with screws.
Active flow rate compensation
A sensor continuously measures the pressure in the nozzle and adjusts extrusion, for accurate layers and clean walls.
Whisper quiet
Active motor noise cancelling and a silent mode below 48 dB. Perfectly at home in a living room, classroom or office.
Plug & play
Delivered pre-assembled and pre-tuned: you’re ready for your first print in about 20 minutes.
Smart and connected
Wi-Fi, the Bambu Handy app, a camera for monitoring and timelapses, a filament sensor and power-loss recovery. Also works offline via microSD or LAN mode.
Applications
Who is the A1 mini Combo for?
Creative makers
Colourful figures, keyrings, name tags and gifts, straight in colour and without painting. MakerWorld is full of multicolour models.
Schools & STEAM
Colour makes models easier to understand: think maps, molecules or pupils’ own designs. We also offer teacher training.
A1 mini teacher training →Makerspaces & libraries
Compact, quiet and low-maintenance, with the wow factor of multicolour: ideal for workshops and open studios.
Technical specifications
Not suitable for ABS, ASA, PC, PA or fibre-reinforced filaments: for those you need an enclosed printer such as the P2S.
What’s in the box
- A1 mini (pre-assembled)
- Spool holder
- Purge wiper
- Build plate
- PTFE tube
- Filament sample (approx. 20 g, random colour)
- Stainless steel nozzle (installed)
- Accessory box
- AMS lite (body and stand)
- 4 rotary spool holders for the AMS lite
Choose your version
Prefer single colour, or a bigger printer?
Official Bambu Lab dealer
More than a printer
With FabLab Factory you get a local partner, from setup to repairs.
Unpacked & tested
We unpack, assemble and test your printer. Available when collecting in Aalst or Bornem.
View service →Maintenance & repairs
A maintenance contract for the A1 series and our own repair centre in Aalst.
Maintenance contract →FAQ
Frequently asked questions
Which filaments can I use?
PLA, PETG, TPU and PVA. For beginners we recommend PLA Basic: easy to print, strong and available in dozens of colours. ABS, ASA and engineering filaments need an enclosed printer such as the P2S.
Can I use TPU with the AMS lite?
Flexible TPU is best fed directly from the external spool holder. Use PLA or PETG in the AMS lite.
How much waste does a colour change produce?
At every change the printer flushes a little filament. In Bambu Studio you can reduce this by grouping colours smartly and flushing into the infill or into an extra object.
Do I need an internet connection?
No. Wi-Fi and the Bambu Handy app are the easiest route, but you can also print offline via microSD or in LAN mode.
How fast is delivery?
In stock means delivery in 1 to 3 working days. Collection in Aalst is also possible.
Still unsure?
We’re happy to help you choose the right printer, by phone, by email or in our showroom in Aalst.
Alternative Products
These other products might interest you