Bambu Lab P2S
The icon of the P series, redefined
The P2S builds on the popular P1S with Bambu Lab’s second-generation technology: a servo extruder with 70% more extrusion force, automatic flow calibration, an adaptive airflow system and AI error detection. Enclosed, fast and ready for engineering and fibre-reinforced filaments.
Why the P2S
Second generation, down to the details
Servo extruder with 70% more force
The PMSM servo motor delivers up to 8.5 kg of extrusion force and detects filament grinding and clogs in real time.
Automatic flow calibration
An eddy current sensor measures nozzle pressure and adjusts the flow for consistent extrusion in every layer and corner.
Adaptive airflow system
Cool outside air for PLA with the door closed, or heat retained up to 50 °C in the chamber for ABS and ASA, cleaned by a carbon filter.
AI error detection
A 2 TOPS NPU spots spaghetti, nozzle clumping and purge chute jams, and checks the start of every print.
30-second nozzle swap
One clip releases the whole hotend, with no wiring to disconnect. Also works with H2D hotends.
High Flow hotend →Multicolour with AMS
Connect up to 4 AMS 2 Pro and 4 AMS HT units: 20 slots for up to 20 colours or materials, with filament drying.
AMS 2 Pro →Applications
Who is the P2S for?
Makers & hobbyists
From functional parts to cosplay, in PLA, PETG and TPU, as well as ABS and ASA.
Education & makerspaces
Enclosed, with a carbon filter and door sensor, and easy to use via the new touchscreen.
Businesses & print farms
Prototypes, jigs and small batches, including carbon-fibre reinforced filaments.
Technical specifications
Recommended space for the printer: 500 × 500 × 950 mm. Operating temperature 10–30 °C.
What’s in the box
- Bambu Lab P2S
- Build plate (Textured PEI)
- Spool holder
- Accessory box
Choose your version
Prefer it with AMS, or another model?
Official Bambu Lab dealer
More than a printer
With FabLab Factory you get a local partner, from setup to repairs.
Unpacked & tested
We unpack, assemble and test your P2S, with 60 minutes of explanation. When collecting in Aalst.
View service →Starter package
Installation and guidance on site, so you can get started straight away.
View package →Maintenance & repairs
A maintenance contract for the P2 series and our own repair centre in Aalst.
Maintenance contract →FAQ
Frequently asked questions
What’s the difference from the P1S?
The P2S adds a servo extruder with 70% more extrusion force, automatic flow calibration, an adaptive airflow system, AI error detection, a 5-inch touchscreen, a 1080p camera and a hardened steel nozzle as standard. The build volume stays at 256 × 256 × 256 mm.
Can I print carbon fibre filament?
Yes. The nozzle and extruder gear are hardened steel, so fibre-reinforced filaments such as PLA-CF, PETG-CF and PA6-CF are no problem.
Does the P2S have a heated chamber?
No, there’s no active chamber heating. A flap keeps the heat inside, up to about 50 °C, for warp-prone filaments such as ABS and ASA. If you want active chamber heating, take a look at the H2S.
Can I add an AMS later?
Yes. You can connect up to 4 AMS 2 Pro and 4 AMS HT units, 20 slots in total. Want to print in colour straight away? Choose the P2S Combo with AMS 2 Pro.
Do my old build plates fit?
Yes, the dimensions are the same. Only automatic plate type recognition doesn’t work with older plates.
How fast is delivery?
In stock means delivery in 1 to 3 working days. Out of stock? Order anyway and we’ll deliver as soon as it arrives. Collection in Aalst is also possible.
Still unsure?
We’re happy to help you choose the right printer, by phone, by email or in our showroom in Aalst.
Produits alternatifs
Ces autres produits pourraient vous intéresser