Bambu Lab X2D Combo
Two nozzles and AMS 2 Pro: colour without compromise
The X2D Combo pairs the X2D with the AMS 2 Pro. Two nozzles switch in a split second, for faster colour changes with less waste and supports that come off cleanly. The AMS 2 Pro keeps your filament dry and airtight, and can be expanded to 25 colours.
Why the X2D Combo
Multicolour, supports and engineering materials in one
AMS 2 Pro included
Four spools with active drying and airtight storage. Expandable: with extra AMS units and two nozzles you can print up to 25 colours.
Two nozzles
The main nozzle prints your model, the auxiliary nozzle prints supports in their own material. They peel off cleanly, and colour changes are faster with less waste.
Actively heated chamber
Nozzles up to 300 °C and a chamber actively heated to 65 °C: enough for most engineering filaments like ABS, ASA and nylon, with strong, flat prints.
Servo extruder
The PMSM servo motor on the main nozzle corrects pressure fluctuations 20,000 times per second, for smooth surfaces at full speed.
AI monitoring with two cameras
A live view and a toolhead camera check the build plate beforehand and watch for spaghetti, clumping and jams while printing. 31 sensors monitor the entire system.
Clean air, quiet
Three-stage filter with G3 pre-filter, H12 HEPA and activated carbon, below 50 dB. UL 2904 certified for indoor use with Bambu PLA Basic and PETG Basic.
Applications
Who is the X2D Combo for?
Designers & makers
Complex models with overhangs, folds and internal channels, with supports that come off cleanly and leave no scars.
Engineering & prototyping
Strong parts in ABS, ASA, nylon and carbon fibre reinforced filaments, thanks to the heated chamber and hardened nozzles.
Education & makerspaces
Enclosed, quiet and with HEPA and carbon filters: suited to classrooms and shared workshops.
Technical specifications
The auxiliary nozzle prints slightly less finely than the main nozzle: use it mainly for supports or a second material. The X2D runs on 200–240 V.
What’s in the box
- Bambu Lab X2D
- Textured PEI build plate
- External exhaust fan bundle
- Spool holder
- Accessory box
- AMS 2 Pro
Fill your AMS 2 Pro straight away
You need 4 spools for 4 colours. Put support filament on the auxiliary nozzle for supports that come off cleanly.
PLA BasicSupport for PLAABSChoose your version
More colours or materials?
Official Bambu Lab dealer
More than a printer
With FabLab Factory you get a local partner, from setup to repairs.
Starter package
Installation and guidance on site, so you can get going with two nozzles straight away.
View package →Maintenance & repairs
A maintenance contract for the X2 series and our own repair centre in Aalst.
Maintenance contract →Showroom in Aalst
See the X2D at work and compare it with the P2S and H2 series, by appointment.
Book an appointment →FAQ
Frequently asked questions
What is the difference with the X1-Carbon?
The X2D is its successor. It adds two nozzles (up to 25 colours), an actively heated chamber up to 65 °C, a servo extruder, filament tangle detection, AI monitoring with two cameras and support for the Vision Encoder.
How many AMS units can I connect?
Up to 4 AMS 2 Pro and 8 AMS HT (24 slots), daisy-chained with 6-pin cables. With two nozzles that gives up to 25 colours. From three AMS units you need a 4-in-1 PTFE adapter; the AMS hub is not compatible.
Does the AMS 2 Pro drying function work?
Yes. One AMS 2 Pro dries via the 6-pin cable while the printer is on standby; printing is paused meanwhile. To dry several AMS 2 Pro units at once you need additional official power adapters.
Are the two nozzles identical?
The hotends themselves are identical and interchangeable. The auxiliary nozzle has a simpler drive and prints slightly less finely, so it is best to print the model itself with the main nozzle.
Can I print carbon-fibre filament?
Yes. Both nozzles are hardened steel. Carbon and glass fibre reinforced PLA, PETG, ABS, ASA, PA6, PAHT, PPA and PET are printed with the main nozzle.
How fast is delivery?
In stock means delivery in 1 to 3 working days. Out of stock? Order anyway and we’ll deliver as soon as it arrives.
Still unsure?
We’re happy to help you choose the right printer, by phone, by email or in our showroom in Aalst.
Produits alternatifs
Ces autres produits pourraient vous intéresser