Colour chart
All colours and their stock
Click Spool or Refill to select that colour straight away.
See all colours and stock
Bambu Lab PLA Pure
Pure PLA for home printing, with five ingredients
PLA Pure is made for home printing. It contains just five ingredients, all tested to EU food-contact standards, pigments included. It prints with noticeably lower emissions and has been tested to the EU toy safety standard EN 71-3.
Spool or refill?
Two ways to buy Bambu Lab PLA Pure
Filament on a spool
Ready to print. Keep the reusable spool for your next refills.
View the spool version →Refill (without spool)
Cheaper and less waste: click the refill onto your reusable Bambu spool. Works in the AMS series.
Reusable spool →Swapping a refill
How to fit a refill onto the spool is explained step by step in the Bambu Lab wiki.
Go to the wiki →Print settings
Recommended values from Bambu Lab’s technical data sheet. With the RFID chip, your printer sets them automatically.
Don’t use glue on the build plate: glue residue can compromise the safety of food-contact parts. Raise the bed temperature instead for better adhesion.
Properties
More PLA
Need a different finish or more strength?
FAQ
Frequently asked questions
Can I use printed parts with food?
The filament itself has been tested to EU food-contact standards. Printed parts are not suitable for liquid foods and must not get hotter than 60 °C. If you do want to use them with food, print without glue, with a new nozzle and a dedicated print path (AMS, PTFE tube, build plate) that you only use for PLA Pure. More details are in the Bambu Lab wiki.
Does PLA Pure work in the AMS?
Yes, in the AMS, AMS 2 Pro, AMS HT and AMS lite. Thanks to the RFID chip, the AMS recognises the colour and print settings automatically.
Can I order a colour that’s out of stock?
No, we only sell filament from stock. Click the colour you want in the colour chart and ask to be notified as soon as it’s back in stock.
How should I store this filament?
Dry and airtight, below 20% humidity, for example with desiccant. If the filament has absorbed moisture, dry it: 8 hours at 50 °C in a drying oven.
How fast is delivery?
In-stock items are usually delivered within 1 to 3 working days in Belgium. Collection in Aalst is also possible.
Questions about filament?
We’re happy to help you pick the right colour or material, by phone or by email.