- Products
- 3D Printing
- Bambu Lab
- Filament
- Bambu Lab ABS
Bambu Lab ABS
Official Bambu Lab dealer
Bambu Lab ABS filament
Tough, impact-resistant and heat-resistant: ABS is ideal for technical parts, housings and car accessories. Print it in an enclosed printer for the best results. Thanks to the RFID chip, your AMS recognises the colour and print settings automatically, and you can see the stock for every colour.
Which ABS are you looking for?
Compare
Which ABS suits your project?
All Bambu Lab ABS filaments side by side, in the same order as above.
| Filament | Why choose it | Ideal for | Good to know |
|---|---|---|---|
| 1. For everyday printing | |||
| ABS | Tough, impact-resistant and heat-resistant | Housings, car parts and technical prints | Spool or refill, enclosed printer recommended |
| 2. Extra stiff | |||
| ABS-GF | Stiffer and more dimensionally stable thanks to glass fibre | Mechanical parts and prints with a clean finish | Enclosed printer required, no 0.2 mm nozzle |
| Accessories | |||
| Support for ABS | Easy to remove, dissolves in limonene | A smooth underside on overhangs | For the support interface only, nozzle of 0.4 mm or larger |
Open or enclosed?
Why ABS needs an enclosed printer
Enclosed printer
ABS shrinks as it cools. In an enclosed printer the temperature stays stable and your print warps less. Think of a P1S, P2S, X1 or H2D.
Open printer
Bambu Lab does not recommend ABS on an open printer such as the A1: the print cools unevenly and can lift or crack. Choose PETG instead.
View PETG →Good to know
How to get the most out of your ABS
Store it dry
Ideally dry ABS for 8 hours at 80 °C and store it airtight below 20% humidity. Dry filament gives a nicer surface.
Build plate and glue
Use the Textured PEI, Smooth PEI or Engineering Plate at 90 to 100 °C, not the Cool Plate. A layer of glue helps prevent lifting.
Ventilate well
ABS gives off an odour while printing. Place your printer in a well-ventilated room.
ABS-GF and the nozzle
ABS-GF contains glass fibre. Don’t use a 0.2 mm nozzle; a hardened steel nozzle is recommended. Regular ABS prints with any nozzle.
FAQ
Frequently asked questions
ABS or ASA: which should I choose?
Both are tough and heat-resistant. ASA is also UV-resistant, so it is better for prints that stay outdoors for a long time. For technical prints indoors or in the car, ABS is a great choice.
Can I print ABS on an A1?
Bambu Lab advises against it. ABS needs an enclosed printer to avoid warping and cracking. For an open printer, PETG is a good alternative.
Does ABS work in the AMS?
Yes. ABS, ABS-GF and Support for ABS work in the AMS. ABS and ABS-GF also work in the AMS lite.
Can I order a colour that is out of stock?
No, you can only order what is actually in stock. Each product page shows how many units of each colour are available. If a colour is temporarily unavailable, ask to be notified on the product page or get in touch with us.
How fast is delivery?
In-stock items are usually delivered within 1 to 3 working days in Belgium. Collection in Aalst is also possible.
Questions about filament?
We’re happy to help you pick the right colour or material, by phone or by email.