Do you dare to print with ICE Filaments PLA? Only the brave survive, so be careful. Go to the extreme and print high qualitity with ICE Filaments PLA.
ICE Filaments PLA is a strong, user friendly high quality filament that is harder and less fragile than other PLA’s. ICE Filaments PLA is easily printable at low temperature. One of the biggest advantages is that ICE Filaments PLA has low warping.
PLA, Poly Lactic Acid, is a biodegradable kind of plastic that is made of renewable natural resources. It also is one of the most popular materials for 3D printing.
ICE Filament PLA is printable on every desktop FDM or FFF technology 3D printer. It has been tested on:
ICE Filaments is a brand of Trideus bvba. We have developed this line of filaments because we want to grant every customers wishes. At Trideus, we can test our filaments with different types of printers, what gives us the advantage develop a line of filaments that doesn’t focus on one printer alone, but that prints high quality prints on all the open source printers in our gamma. Also all the closed source printers that work with reels can use ICE Filaments materials.
|Material Type||Polylactic Acid|
|Weight on the spool||750 gr|
|Printing temperature||180 - 210°C|
|melting temperature||210° C (± 10°C)|
|Print speed||25mm/sec - 250mm/sec|
|Recommended temperature printbed||± 35 - 60 °C|
|Diameter tolerance||1,75mm: ± 0,05mm / 2,85mm: ± 0,10mm|
|Specific gravity||1,24 g/cc|
|Tensile strength||110 MPa (MD) / 145 MPa (TD)|
|Elongation at break||160% (MD) / 100% (TD)|
|Tensile modulus||3310 MPa (MD) / 3860 MPa (TD)|
|Impact strength||7,5 KJ/m²|
|Melting point||145 - 160°C|
PLA (polylactic acid) is one of the most widely used 3D printing materials and also the recommended material for beginners. It prints fast, it is... View full product details
ABS (acrylonitrile butadiene styrene) is a frequently used 3D printing material. It has good mechanical properties and can be used for a wide range of... View full product details
After ABS and PLA, Ultimaker has added a new material type to its gamma. The CPE line was created to print complex, technical prints. Comes... View full product details
PVA (Polyvinyl Alcohol) is a water soluble support material for multi-extrusion 3D printing. With a good thermal stability, Ultimaker PVA is ideal for printing complex... View full product details