A1 Series Hotends Kit

https://www.fablabfactory.com/web/image/product.template/1505/image_1920?unique=19cb4fb

36,13 € 36.13 EUR 36,13 € VAT Excluded

36,13 € VAT Excluded

Not Available For Sale

  • Compatibiliteit

Deze combinatie bestaat niet.

TOEVOEGEN AAN WINKELMANDJE

   

Compatibiliteit: A1 Series

Interne referentie: KIT005

Quick Swap Nozzle Design


The special design of hotend heating assembly enables easy separation of the thermal and electronic components of the hotend. In addition, the magnetic block installed on the hotend heatsink enables quick and accurate fixation of the hotend to its precise mounting position. This feature enhances the convenience of quick swapping, allowing for easy removal and installation of the hotend.

*Please ensure that the hotend has cooled down before swapping, and avoid touching the heat block (lower section of the hotend) to prevent any risk of burns.


Filament Compatibility

Material0.2 mm Nozzle0.4 mm Nozzle0.6 mm Nozzle0.8 mm NozzleHardened Steel Required?
General PLAYESYESYESYESOptional
PLA Sparkle*NOYESYESYESOptional
PLA Marble*NOYESYESYESOptional
Wood/Rock/Metal-filled PLA*NOYESYESYESOptional
PETGYESYESYESYESOptional
PVAYESYESYESYESOptional
ABSYESYESYESYESOptional
ASAYESYESYESYESOptional
PCYESYESYESYESOptional
PA*NOYESYESYESOptional
TPU*NOYESYESYESOptional
Bambu PLA-CF*NO*Highly
Recommended
YESYES*Required
Bambu PETG-CF*NO*Highly
Recommended
YESYES*Required


[*Note]

  1. Filaments with carbon fiber, glass fiber, metal, or other inorganic particles are prone to clog a 0.2 mm nozzle.
  2. For filaments containing carbon fiber or glass fiber, it is highly recommended to use a hardened steel 0.6 mm nozzle to minimize the risk of clogging and abrasion.
  3. Bambu PLA-CF and Bambu PETG-CF have been extensively tested and proven to have a low risk of clogging when printed with a hardened steel 0.4 mm nozzle, while also achieving higher print quality.



Installation

Learn more about replacing the Hotend with Nozzle on Bambu Lab Wiki.


In the Box

1. Stainless Steel Hotend 0.2 mm - A1 Series *1

2. Hardened Steel Hotend 0.4 mm - A1 Series *1

3. Hardened Steel Hotend 0.6 mm - A1 Series *1

4. Hotend Silicone Sock - A1 Series *3

Compatibility

A1 Series